Search
Search Criteria
Products meeting the search criteria
CANopen Stepper Motor Controller, It supports the CiA301 and CiA402 sub-protocols
of the CANopen protocol.
UC42 uses the latest 32-bit DSP digital chip and has advanced drive control algorithms and noise
suppression technology to ensure smooth motor operation. Stable, low noise, and temperature controllable.
Users can set any ID address within 1-255 and any current value within 0-8A through the host computer.
Maximum output peak current of the UC42 bus driver is 2.5A.
UC42 can be set to 1-256 subdivisions and adopts built-in micro-subdivision technology, which can achieve
high subdivision effects even under low subdivision conditions, ensuring that the motor operates with uniform
step intervals and no large or small step problems.
3 input signal ports and 2 output signal ports, supporting position, speed, and return-to-origin control modes.
with highest communication rate in 1Mbps.
Input signal Wiring diagram and Output Signal wiring diagram↑
UC42 is designed for NEMA17 stepper motor, we supply NEMA17 integrated stepper motor with
torque 0.35, 0.50 and 0.7Nm:
if just choose UC42 stepper motor controller with requirement for low vibration, please inform us for
setting parameters before sale. 
| Model No. | Holding Torqure(Nm) | Motor Length(mm) |
| UC42-03 | 0.35 | 40 |
| UC42-05 | 0.50 | 48 |
| UC42-07 | 0.70 | 60 |
Port Definition
It can be connected to PLC, industrial computer, controller and other host computers with only two
communication lines. Through the built-in motion Control instructions can realize a network of up to
100-axis stepper motors.
especially suitable for long-distance multi-axis applications, which can reduce wiring and enhance
the reliability of drive operation.
Mainly used in electronic equipment, semiconductors, medical instruments, environmental protection equipment,
automatic detection equipment, small automatic processing equipment and other automation equipment with
multiple motor shaft applications and compact requirements for equipment space
CANopen Standard Command Read and Write:
UC42 CANopen Stepper Motor Controller User Manual
CANOpen Software
More Information on detail, please feel free to contact me
Size:
NEMA8, NEMA11, NEMA14, NEMA17, NEMA23, NEMA23, NEMA34
20mm, 28mm, 35mm, 42mm, 57mm, 60mm, 86mm
Stepper
0.001524mm~0.16mm
Performance
Maximum thrust up to 240kg, low temperature rise, low vibration, low noise,
long life (up to 5 million cycles), and high positioning accuracy (up to ±0.005 mm)
Application
Medical diagnostic equipment, life science instruments, robots, optical equipment,
analytical instruments, semiconductor equipment, communication equipment, automation equipment
NEMA17 Lead Screw Linear Actuators
Linear Module, Linear Slider
| Motor Type | Bipolar stepper |
| Step Angle | 1.8° |
| Voltage (V) | 2.6 / 3.3 / 2 / 2.5 |
| Current (A) | 1.5 / 1.5 / 2.5 / 2.5 |
| Resistance (Ohms) | 1.8 / 2.2 / 0.8 / 1 |
| Inductance (mH) | 2.6 / 4.6 / 1.8 / 2.8 |
| Lead Wires | 4 |
| Motor Length (mm) | 34 / 40 / 48 / 60 |
| Stroke (mm) | 30 / 60 / 90 |
| Ambient Temperature | -20℃ ~ 50℃ |
| Temperature Rise | 80K Max. |
| Dielectric Strength | 1mA Max. @ 500V, 1KHz, 1Sec. |
| Insulation Resistance | 100MΩ Min. @500Vdc |
Motor Characteristics:
Motor Size | Voltage/ Phase (V) | Current/ Phase (A) | Resistance/ Phase (Ω) | Inductance/ Phase (mH) | Number of Lead Wires | Rotor Inertia (g.cm2) | Motor Weight (g) | Motor Length L (mm) |
42 | 2.6 | 1.5 | 1.8 | 2.6 | 4 | 35 | 250 | 34 |
42 | 3.3 | 1.5 | 2.2 | 4.6 | 4 | 55 | 290 | 40 |
42 | 2 | 2.5 | 0.8 | 1.8 | 4 | 70 | 385 | 48 |
42 | 2.5 | 2.5 | 1 | 2.8 | 4 | 105 | 450 | 60 |
Available Lead Screw and Travel per Step:
Diameter (mm) | Lead (mm) | Step (mm) | Power off self-locking force (N) |
6.35 | 1.27 | 0.00635 | 150 |
6.35 | 3.175 | 0.015875 | 40 |
6.35 | 6.35 | 0.03175 | 15 |
6.35 | 12.7 | 0.0635 | 3 |
6.35 | 25.4 | 0.127 | 0 |
NEMA17 Linear Actuator outline drawing:
Stroke S (mm) | 30 | 60 | 90 |
Dimension A (mm) | 70 | 100 | 130 |
More Information on detail, please feel free to contact me
| Step Accuracy: | ±5% | Resistance Accuracy: | ±10% |
|---|---|---|---|
| Inductance Accuracy: | ±20% | Temperature Rise: | 80°C MAX |
| Ambient Temperature Range: | -20°C~ 50°C | Storage Temperature Range: | -30°C~ 60°C |
| Insulation Resistance: | 100M Ω MIN. 500V DC | Dielectric Strength: | 500V AC 1min |
| Radial Play: | 0.02mm MAX. (450g Load) | End Play: | 0.08mm MAX. (450g Load) |
| Max. Radial Force: | 20N | Max. Axial Force: | 2N |
NEMA17 Stepper Motor, Closed Loop stepper motor
Electrical Specifications:
| Mode No. | Step Angle | Motor Length mm | Rated Current A | Holding Torque (MIN) N.m | Motor Weight kg | Shaft Dia. mm |
| 17H249-01ED1000 | 1.8 | 67.1 | 0.6 | 0.48 | 0.36 | 5.0 |
| 17H249-02ED1000 | 1.8 | 67.1 | 1.2 | 0.48 | 0.36 | 5.0 |
| 17H249-03ED1000 | 1.8 | 67.1 | 1.8 | 0.48 | 0.36 | 5.0 |
| 17H261-01ED1000 | 1.8 | 79.1 | 0.6 | 0.72 | 0.50 | 5.0 |
| 17H261-02ED1000 | 1.8 | 79.1 | 1.2 | 0.72 | 0.50 | 5.0 |
| 17H261-01ED1000 | 1.8 | 79.1 | 1.8 | 0.72 | 0.50 | 5.0 |
Stepper motor with 1000 Line Encoder:
1. Black : EGED
2. RED : 5VCC
3. Blue/White : EA-
4 Blue : EA
5. Orange/White : EB-
6. Orange : EB
Mechanical Dimensions and Wiring Diagram:
NEMA17 Stepper Motor with encoder, 17H249ED1000
DC24V Torque Speed Curve:
NEMA17 Stepper Motor with encoder, 17H261ED1000:
DC24V Torque Speed Curve:
Lead Wire Mode Options:
Shaft Mode can be customized as the requirement.
More Information on detail, please feel free to contact me
| Step Accuracy: | ±5% | Resistance Accuracy: | ±10% |
|---|---|---|---|
| Inductance Accuracy: | ±20% | Temperature Rise: | 80°C MAX |
| Ambient Temperature Range: | -20°C~ 50°C | Storage Temperature Range: | -30°C~ 60°C |
| Insulation Resistance: | 100M Ω MIN. 500V DC | Dielectric Strength: | 500V AC 1min |
| Radial Play: | 0.02mm MAX. (450g Load) | End Play: | 0.08mm MAX. (450g Load) |
| Max. Radial Force: | 20N | Max. Axial Force: | 2N |
NEMA17 Stepper Motor, 1.8° step angle stepper motor
Electrical Specifications:
| Mode No. | Step Angle | Motor Length mm | Rated Voltage v | Rated Current A | Phase Resistance Ω | Phase Indutance Mh | Holding Torque(MIN) N.cm | Detent Torque(MAX) N.cm | Rotor Torque g.cm2 | Lead Wire | Motor Weight g |
| 17HS3601 | 1.8 | 33 | 12 | 0.16 | 75 | 40 | 14 | 1.6 | 34 | 6 | 220 |
| 17HS3603 | 1.8 | 33 | 12 | 0.3 | 40 | 22 | 12.5 | 2 | 34 | 6 | 200 |
| 17HS3413 | 1.8 | 33 | 2.8 | 1.33 | 2.1 | 2.5 | 22 | 1.2 | 35 | 4 | 220 |
| 17HS4604 | 1.8 | 40 | 12 | 0.4 | 30 | 30 | 26 | 1.5 | 54 | 6 | 280 |
| 17HS4612 | 1.8 | 40 | 3.84 | 1.2 | 3.2 | 2.8 | 28 | 2.2 | 54 | 6 | 280 |
| 17HS4417 | 1.8 | 40 | 2.55 | 1.7 | 1.5 | 2.8 | 40 | 2.2 | 54 | 4 | 280 |
| 17HS5604 | 1.8 | 48 | 12 | 0.4 | 30 | 28 | 38 | 2.8 | 68 | 6 | 360 |
| 17HS5608 | 1.8 | 48 | 6 | 0.8 | 7.5 | 6.3 | 32 | 2 | 68 | 6 | 350 |
| 17HS5413 | 1.8 | 48 | 4.16 | 1.3 | 3.2 | 5.5 | 52 | 2.6 | 68 | 4 | 350 |
| 17HS5423 | 1.8 | 48 | 2.76 | 2.3 | 1.2 | 1.6 | 46 | 2.6 | 68 | 4 | 350 |
| 17HS5425 | 1.8 | 48 | 3.1 | 2.5 | 1.25 | 1.8 | 48 | 2.8 | 68 | 4 | 360 |
Mechanical Dimensions and Wiring Diagram:
Lead Wire Mode Options:
Shaft Mode can be customized as the requirement.
More Information on detail, please feel free to contact me
- 1