ADM42 Stepper Motor Driver, Pulse & Direction Stepper Motor Driver

● Miniature size 42.3mmx42.3mm x21mm

● Pulse & direction stepper driver also support the standard RS232 serial command, and built-in 32bit digital chip.

● Using new control algorithms such for vibration suppression and low heat generation

● DC input voltage 12~32VDC, recommended working voltage 24VDC.

● Continuous output current 1.58A max, max peak current 2.2A.

● Integrated design, mounted with 42/39mm stepper motor.

● Low vibration, low noise, stable operation, low motor heating.

● Any micro-step can be set .

● Protection functions such as overvoltage, undervoltage and overcurrent.

● Built-in automatic matching function of motor parameter.

● ADM42 stepper driver can be assembled for NEMA17 Integrated Stepper Motors

1.VDC: Positive power input: DC voltage 12-32VDC

2.GND: Negative power input: DC voltage GND

3.OPTO: Pules Direction, Enable common anode Input: 5V DC,

4.PUL-:  Pulse Control Signal Input, Rising Edge effective

5.DIR-:  Direction Control Signal Input, Rising Edge effective

6.ENA-: Enable Signal Input, Rising Edge effective

7.TXD:  To the TX pin on user device

8.RXD: To the RX pin on user device

Make the integrated NEMA17 stepper motor directly via simple screw:


ADM42 Pulse & Dircetion type stepper motor driver User Manual